某型运载火箭1/5动力学缩比模型设计

缩比模型试验是获取大型运载火箭动特性的一种有效途径,其中一项重要内容是动力学缩比模型设计。本文以某型运载火箭为原型对象,首先根据其结构组成分别推导各部件的相似关系;然后,利用横向刚度和质量相似系数保持一致性,联立形成了运载火箭横向动特性相似关系;同时,考虑实际加工制造条件,分析了横向刚度和质量相似系数的约束;最后,根据上述相似关系和相似系数约束设计了1/5缩比模型,并对该缩比模型的动特性相似进行了有限元数值计算验证。验证结果表明,设计所得1/5缩比模型在动特性方面与原型具有较高的相似性,相关方法能够有效应用于运载火箭的动力学缩比模型设计。     

Quantifying optimal mesh and ring design costs

During the last decade telecommunication operators have been deploying WDM (Wavelength Division Multiplexing) technology to satisfy the exponential growth in global communication. While facilitating the advanced information society of today, this has also led to a higher dependency on the networks, and furthermore the high capacity utilization of optical fibers means that a single link failure will influence many users and enterprises. For these reasons, protection of network connections has become a major competitive parameter for the operators. Currently, the most popular protection method is ring protection, due to its simplicity, requiring only basic management functionality and operating with local restoration control. While many optical rings have been deployed, little work has been published on exactly what the cost of ring networks are, compared to general mesh networks. In this article we perform a quantitative comparison between ring protection and mesh protection, using real world network data and realistic prices for network components. Extending classic LP flow models to take rings and node costs into account, and using a link‐path based mesh network LP model, we are able to perform a total cost comparison of the two architectures, and of manual ring network design. The results suggest that the price of mesh network components must be reduced significantly to be competitive with ring based networks, and also that manual network design does not necessarily lead to the most cost‐efficient designs. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

点邻域尺度差异描述的点云配准算法

针对传统特征描述符计算复杂度高、配准精度低的问题,提出一种基于不同尺度点邻域特征信息差异的点云配准算法。在特征描述符方面,对关键点选取不同尺度的邻域空间,计算各尺度空间之间的特征值归一化向量差异和法向量夹角,建立点邻域尺度差异描述符,特征描述符计算简单且节省时间。在关键点选取方面,根据曲面形状指数设计了一种寻找关键点的方法,提取的点具有很好的代表性。在对应关系寻找方面,提出一种基于欧式距离的对应点二重筛选方法,找出对应点对集,设计了基于全局距离的全局最优点云变换矩阵求取方法。实验结果表明,点邻域尺度差异描述的点云配准算法具有良好的配准精度和稳健的噪声鲁棒性。     

非高斯码元检测的马尔可夫链蒙特卡洛算法

针对实际超低频接收机不仅受非高斯噪声的影响,还受接收机内部和外部环境中高斯噪声影响的问题,对噪声采用非高斯分布和高斯分布的混合模型建模,根据混合模型的性质,设计了一种利用马尔可夫链蒙特卡洛方法的超低频信号码元盲检测算法。盲检测算法在贝叶斯层次模型下,采用Gibbs抽样和M-H抽样更新参数,同步估计信道衰落系数和噪声模型参数,并实现对信号码元的检测。算法迭代效率快、精度高。通过与最优检测算法性能比较,盲检测算法性能优异,对超低频信号接收具有重要的现实意义。     

Numerical investigation of dynamic interaction with projectile and harmonic behaviour for T-finned machine gun barrels

Machine gun barrels differ from their rifle counterparts in terms of profile. To support high rates of sustained fire, machine gun barrels are made thicker in order to dissipate more heat and maintain their flexural rigidity and thus accuracy, but on other hand they also contribute in weight addition to weapon. This investigation deals with comparison between a conventional machine gun barrel and an improved innovative design having T-fins, both having same weight and chambered in 5.56 × 45 NATO ammunition, to compare their structural and harmonic characteristics which were parameterized by factors such as modal spectrum, directional deformation at muzzle ends during a single shot fire and harmonic behaviour at corresponding range of exciting frequencies. The solid models of both the barrels having same weight, were created using Solidworks. The continuous input data functions were generated by MATLAB using the field tested discreet data points. The generated velocity-distance functions were converted into time dependent functions using integration algorithms to calculate transient parameters such as time steps, excitation frequency range, angle of rotation of projectile and its angular velocity. The dynamic condition simulated the varying nature of forces due to eccentricity in projectile and this data was fed to a time step study using ANSYS transient structural work bench followed by modal and harmonic analysis. The results showed a significant reduction in muzzle end deformation which thus proved that the T-finned barrel, although had same weight as that of the conventional one, but had better structural and harmonic characteristics, and hence it would inherit better firing accuracy.     

水下缩比航行体热尾流的红外探测实验

根据缩比模型,建立缩比红外成像实验测试系统,对水下航行体的体积、航行深度、运动速度、尾流排放等进行缩比设计,设计多种实验工况,可实现缩比目标模型红外尾流的静态和动态测试。一方面明确红外尾流的可探测性,另一方面掌握红外尾流可探测性的影响因素以及红外尾流的变化规律,为下一步工作奠定基础。缩比实验结果表明,利用区域灰度均值和均方差的起伏变化可有效探测水下航行体水面尾迹。     

螺栓法兰连接结构有限元模型参数确定方法

螺栓法兰连接广泛用于各种工业结构中,为准确预测该连接在实际工作中发挥的作用,需要建立准确高效的有限元模型。针对有限元建模过程中模型各种参数的确定问题,综合使用数值仿真手段和试验手段分别对模型网格参数和接触参数的确定开展研究。参数确定后的螺栓法兰连接结构有限元模型在保证计算精度的前提下,计算效率得到显著提高。     

基于滑移网格的潜艇旋臂试验数值模拟?

潜艇水动力系数对潜艇操纵性研究具有重要意义。为了获取较高精度的潜艇旋转导数，以分区结构化网格为基础，采用基于固定坐标系的滑移网格方法，对SUBOFF潜艇进行旋臂试验数值仿真。并对比两种不同的湍流模型下仿真结果，误差均在8％以内，满足工程要求，验证了方法的可行性。     

基于模糊层次分析法的雷达导引头干扰效能评估

为评估对主动雷达导引头的干扰效能,结合导引头工作原理和功能特性,运用模糊数学理论,构建了对雷达导引头干扰效能进行评估的指标体系,建立了二级模糊评判模型,采用正态分布形式构造隶属函数,并利用指数标度的层次分析法(AHP)确定各因素的权重,使得判断矩阵的一致性指标得到改善,实现对雷达导引头的量化评估。最后选择噪声干扰为例进行模糊综合评判,实例分析结果表明该雷达导引头干扰效能模糊评判模型具有实用性,其评估结果可为干扰措施的选择提供参考。     

Effect of silicon carbide and wire-mesh reinforcements in dissimilar grade aluminium explosive clad composites

Aluminium composites are inevitable in the manufacture of aircraft structural elements owing to less weight, superior corrosion resistance and higher specific properties. These composites reduce the weight of the aircraft, improve the fuel efficiency and enhance the maintenance duration. This study proposes the development of dissimilar grade aluminium (aluminium 1100-aluminium 5052) composites with different reinforcement’s viz., stainless steel wire-mesh, silicon carbide (SiC) powders and SiC powder interspersed wire-mesh, by explosive cladding technique. Wire-mesh enhances the friction and restricts the movement of flyer plate to craft a defect free clad, while SiC particles form a band on the interface. Highest strength is obtained when SiC powder interspersed wire mesh is employed as reinforcement. The dissimilar aluminium explosive clad with SiC particle reinforcement results in lower strength, which is higher than that of the weaker parent alloy and that of the conventional dissimilar aluminium explosive clads without any reinforcement.